Five sets of plate rolls = Shells, rolled rings, cones and repads
With our selection of five sets of plate rolls, we can provide you with plate rolled into shells, rolled rings, cones (both eccentric and concentric), or repads. These components can be rolled from our own plate inventory or from material that you supply.
Dimensional rolling capacities
- Minimum Diameter: 16" (406 mm) I.D.
- Maximum Thickness: cold rolled 8" (203.20 mm), hot rolled 12" (304.80 mm)
- Maximum Length: 144" (3,658 mm)
Pressure vessel shells rolled to ASME specifications
Pressure vessel shells are rolled to ASME code specifications and rolled to match heads when ordered together.
Square cut, beveled circumferential and long seam shells
We can supply you with square cut or beveled circumferential and long seam shells. Long seams can be provided tack welded or fully welded. We can also provide welded circumferential seams by welding together multiple courses.
Mill test certificates/furnace heat charts
Components rolled from our plate inventory are accompanied with Mill Test Certificates. In the case of hot rolled items, Furnace Heat Charts can be provided upon request.
Pressure vessel plate rolling size chart
| Thickness |
X |
Diameter |
X |
Length |
| 7/8" |
X |
18" O.D. |
X |
10'-0" |
| 1-1/4" |
X |
18" O.D. |
X |
4'-0" |
| 1" |
X |
20" O.D. |
X |
10'-0" |
| 2" |
X |
20" O.D. |
X |
3'-0" |
| 2-3/4" |
X |
24" O.D. |
X |
10'-0" |
| 3" |
X |
24" O.D. |
X |
6'-0" |
| 4" |
X |
30" I.D. |
X |
10'-0" |
| 4-1/2" |
X |
30" I.D. |
X |
5'-0" |
| 3/8" & thicker |
X |
43" I.D. |
X |
12'-0" |
| 6-1/8" |
X |
48" I.D. |
X |
12'-0" |
| 7" |
X |
60" I.D. |
X |
12'-0" |
| 9" |
X |
72" I.D. |
X |
12'-0" |
| 10" |
X |
84" I.D. |
X |
10'-0" |
| 12" |
X |
90" I.D. |
X |
7'-0" |
This chart illustrates variables for guideline purposes only.
As diameters increase, lengths can increase up to 12'-0".
